top of page

Machineries

Logo_MMP_esecutivo_CMYK.gif

MMP Torneria has 45 mechanical lathes, single and multi-spindle, that could be divided into:

  • 2 CNC multispindle machines, with passing bar till Ø35mm

  • 3 mutlispindle with 8 mechanical spindles, with passing bar till Ø32 mm

  • 15 multispindle with 6 mechanical spindles with passing bar till 35mm

  • 15 cnc single spindles with passing bar from 5mm till 65mm, 6 of it with sliding headstock

  • 10 mechanical lathes with passing bar from 3 till 60 mm

They are currently employed on three daily shifts and allow the company to face even the biggest requests in terms of quantity

In addition to these machineries, the company has a department for  production of special and standardized nuts with nearly 30 threading and chamfering machines.

Furthermore, the company has also an optical disc sorting machine and a post-production 0-defect department; these guarantee a 100% quality rating till 10 PPM for each single feature.

Multispindle Department

Multispindle Department
Logo_MMP_esecutivo_CMYK.gif

MMP's Multispindle are:

  • 1 GILDEMEISTER GMC 35

  • 1 GILDEMEISTER GMC 20

  • 1 SCHUETTE AF 08/32

  • 2 MORY SAY 08/32

  • 1 GILDEMEISTER GM 35

  • 3 MORY SAY 06/32

  • 3 GILDEMEISTER GS 20

  • 1 GILDEMEISTER GM 20

  • 1 GILDEMEISTER GM 16

  • 1 GILDEMEISTER AS 16

  • 1 SCHUETTE SF 16

  • 1 SCHUETTE SD 32

  • 1 TORNOS AS 14

 

Here the following raw material are manufactured:

  • Automatic Steels (11SMnPb30/37 11SmN30/37 Telbyplus)

  • Tempered Steel like the PR80 (36SMnPb14)

  • Brass (OT 58-CuZn39Pb3 or similar)

  • High workability alloys aluminum (leghe AW 2011 AW 2007 AW 6026)

  • Steinless steel, just the high workability alloys (1.4305 1.4104)

CNC Department

CNC Department
Logo_MMP_esecutivo_CMYK.gif

MMP's CNC are:

  • 1 TSUGAMI BO38

  • 2 TORNOS GAMMA 20

  • 1 TORNOS DECO 13B

  • 2 CITIZEN A20

  • 1 CITIZEN A32

  • 1 MIYANO 41

  • 1 MYIANO BNE42

  • 1 MIYANO BNE51

  • 1 CITIZEN A32

  • 1 GILDEMEISTER SPRINT 65

  • 1 GILDEMEISTER SPRINT 42

  • 1 GILDEMEISTER SPRINT 32

  • 1 GILDEMEISTER MSL 42

  • 1 GILDEMEISTER GLD 25

 

Here the following raw material are manufactured:

  • Automatic steel (11SMnPb30/37 11SmN30/37 Telbyplus)

  • Tempered steel like the PR80 (36SMnPb14)

  • Brass (OT 58-CuZn39Pb3 or similar)

  • Alluminium (leghe AW 2011 AW 2007 AW 6026 AW6082)

  • Steinless steel (1.4305 1.4304 1.4301 1.4571)

  • Leaded carbon steel (C45Pb)

  • Special Steels with High Strength Classes (ETG 88 ETG100)

MMP and Enviroment

Logo-Per-l'ambiente.png

Since many years MMP Torneria has been working hard in fully decreasing the environmental impact of its productions, with a daily effort in searching the best solutions in sustainability, with a specific focus to the health of his workers.

The company has bought a washing machinery for metal of the latest generation that uses sodium and ultrasound in a vacuum environment. This machinery will substitute 100% the traditional washing machineries with a classic solvent cycle. It is very difficult to find this solution in the sector of the mechanical turning companies, where solvent or modified alcohol solutions prevail.

MMP Torneria also carried out a research concerning oils and solvents used in the different departments in order to guarantee a safe working place to its employees, in fact:

All oils used in MMP’S lathes have a vegetable and non-mineral origin, and this quality dramatically reduces the presence of carcinogenic substances in its mixtures.

All solvents used within the machineries are ester-based, but have an index of danger lower than H302, while the more common available products have a class H304.

 Furthermore, closed hoods have been produced in order to reduce the vaporized liquids in the factory, where very often compressed air is used to clean the pieces and tools. These closed hoods let the aspiration system takes fumes and particles away ,not only within the machines, but also in the outside cleaning processes of the machineries.

MMP Torneria carries out an examination of the air once every six months. The results of these examinations guarantee an inner ambience where all the danger indices are 10 times lower than the maximal limits accepted by the law.

The management takes great pride in these efforts and consider secondary and not influencing the huge additional cost, which derives from the measures taken.

MMP and Enviroment
bottom of page